Awair
The Awair integration will fetch data from your Awair devices
Prerequisites
Connect locally (preferred)
When connecting locally, the integration will poll the device every 30 seconds. Awair provides a list of devices
Connect via the cloud
When connecting via the cloud, data is summarized over 5-minute intervals. All devices are supported. You will need to request access to the Awair API and obtain an access token from the Awair Developer Console
This integration refreshes once every 5 minutes, based on the default per-device quota
Configuration
To add the Awair integration to your Home Assistant instance, use this My button:
Awair can be auto-discovered by Home Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.
Manual configuration steps
If it wasn’t discovered automatically, don’t worry! You can set up a manual integration entry:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the
Add Integration button. -
From the list, select Awair.
-
Follow the instructions on screen to complete the setup.
Available sensors
The integration will fetch data from each device. The following sensors are supported:
- Temperature
- Humidity
- Carbon dioxide
- Total volatile organic compounds
- PM2.5 density
- PM10 density
- Sound level
- Luminescence
Not all devices support all sensors; consult Awair’s documentation to find out what sensors are present on your device. For first-generation Awair devices with a “dust” sensor, the integration will create identical PM2.5 and PM10 sensors (which reflects the capabilities of the sensor - it can detect dust between PM2.5 and PM10 but cannot differentiate between them).