2024.12.5
Home ▸ Integrations ▸

devolo Home Control

devolo Home Control is a Z-Wave ecosystem with a Z-Wave to IP gateway in the center. The integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] allows you to control devices connected to the gateway.

Configuration

To add the devolo Home Control hub to your Home Assistant instance, use this My button:

devolo Home Control can be auto-discovered by Home Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.

Manual configuration steps

If it wasn’t discovered automatically, don’t worry! You can set up a manual integration entry:

  • Browse to your Home Assistant instance.

  • Go to Settings > Devices & Services.

  • In the bottom right corner, select the Add Integration button.

  • From the list, select devolo Home Control.

  • Follow the instructions on screen to complete the setup.

Please do not change the URL provided in the advanced mode unless you know what you are doing.

Supported devices and functions

Switches

The integration provides support for the following Z-Wave devices:

  • devolo Metering Plug v1
  • devolo Metering Plug v2
  • devolo Switch FM
  • Qubino Flush 1 Relay
  • Qubino Flush 1D Relay
  • Fibaro Wall Plug
  • Fibaro Double Relay Switch

Binary sensors

The integration provides support for the following Z-Wave devices:

  • devolo Door/Window Contact
  • devolo Flood Sensor
  • devolo Key-Fob Switch
  • devolo Motion Sensor
  • devolo Smoke Detector
  • devolo Wall Switch
  • Fibaro Floor Sensor
  • Fibaro Motion Sensor
  • Fibaro Smoke Sensor

The integration provides support for the following features:

  • Overload alarm sensor of various switches
  • Sensors I2 and I3 of devolo and Qubino flush mounted relays

Cover

The integration provides support for the following Z-Wave devices:

  • devolo Shutter FM
  • Qubino Flush Shutter

Climate

The integration provides support for the following Z-Wave devices:

  • devolo Radiator Thermostat
  • Danfoss Living Connect Z Radiator Thermostat

Lights

The integration provides support for the following Z-Wave devices:

  • devolo Dimmer FM
  • Qubino Flush Dimmer

Sensor

The integration provides support for the following features:

  • Temperature and brightness of devolo Sensors, that support it
  • Consumptions of devolo and Qubino devices, that support it
  • Voltage of devolo Metering Plug v2

Siren

The integration provides support for the following Z-Wave devices:

  • devolo Siren

Removing the integration

This integration follows standard integration removal. No extra steps are required.

To remove an integration instance from Home Assistant

  1. Go to Settings > Devices & services and select the integration card.
  2. From the list of devices, select the integration instance you want to remove.
  3. Next to the entry, select the three-dot menu. Then, select Delete.