2026.8.0
Home ▸ Integrations

Dyson Infrared

The Dyson Infrared integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] lets you control a Dyson device using any infrared transmitter previously configured in Home Assistant.

Because the integration communicates over infrared, it operates in a one-way, fire-and-forget fashion: commands are sent to the device but there is no feedback channel to confirm the current state of the device. The integration therefore uses assumed states.

Prerequisites

Before setting up the Dyson Infrared integration, you need a working infrared transmitter set up in Home Assistant that exposes an Infrared entity. For example, you can use an ESPHome device with an IR LED pointed at your Dyson device.

Configuration

To add the Dyson Infrared device to your Home Assistant instance, use this My button:

Manual configuration steps

If the above My button doesn’t work, you can also perform the following steps manually:

  • Browse to your Home Assistant instance.

  • Go to Settings > Devices & services.

  • In the bottom right corner, select the Add Integration button.

  • From the list, select Dyson Infrared.

  • Follow the instructions on screen to complete the setup.

Device type

The type of Dyson device to control. Currently, only Fan is supported.

Infrared transmitter

The infrared transmitter entity to use for sending commands. This must be an entity provided by a hardware integration (such as ESPHome) that has already been set up with an IR transmitter.

Supported devices

The integration supports Dyson Fan that can be controlled via the standard Dyson infrared protocol.

Removing the integration

This integration follows standard integration removal.

To remove an integration instance from Home Assistant

  1. Go to Settings > Devices & services and select the integration card.
  2. From the list of devices, select the integration instance you want to remove.
  3. Next to the entry, select the three dots menu. Then, select Delete.