Flipr
Go flipr
There is currently support for the following device types within Home Assistant:
Prerequisites
You will need to use the standalone app for this device to register a username and password.
Configuration
To add the Flipr integration to your Home Assistant instance, use this My button:
Manual configuration steps
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the
Add Integration button. -
From the list, select Flipr.
-
Follow the instructions on screen to complete the setup.
Flipr
Flipr sends data like pH, chlorine or temperature to a cloud server on a regular basis in order to monitor your pool.
There is currently support for the following information within Home Assistant via sensors and binary_sensors :
Entities
Sensors
- Chlorine: the chlorine level
- pH: the pH level of the water
- Water temperature: the temperature of the water
- Red OX: the redox level of the water in mV
- Last measure date: the date of the last measure taken by the flipr
- Battery level: the battery level of the flipr in percentage
Binary sensors
- pH Status: an indicator if the pH level is normal, too low, or too high
- Chlorine status: an indicator if the chlorine level is normal, too low, or too high
Hub
The Hub lets you handle your equipment (pump, heater, light, etc.) from Home Assistant and all of the automation you can imagine.
- Turn on/off the switch inside the Hub and automatically set the Hub in manual mode.
- Choose the mode of the Hub between auto, planning and manual.
Actions
The cloud data is polled every 15 minutes. If you want to force a refresh of the data, you can use the homeassistant.update_entity
action.
Tips
It is recommended that you create your own card with the following sensors where [fliprid] is the id of your flipr:
sensor.flipr_[fliprid]_chlorine
sensor.flipr_[fliprid]_ph
sensor.flipr_[fliprid]_red_ox
sensor.flipr_[fliprid]_water_temp
sensor.flipr_[fliprid]_last_measured
sensor.flipr_[fliprid]_battery_level
Leave binary_sensor.flipr_[fliprid]_ph_status
and binary_sensor.flipr_[fliprid]_chlorine_status
as badges.