2026.1.0
Home ▸ Integrations ▸

Fluss+

The Fluss+ integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] allows you to control Fluss+ devices through Home Assistant. Fluss turns your phone into a remote key that can open your garage, your gate, your door or even the parking at your office - giving you complete control. The Home Assistant integration allows you to trigger Fluss+ devices via Wi-Fi to open or close a connected motor device.

Prerequisites

  • A Fluss+ device (Can order here: https://fluss.io/flussplus).
  • A Fluss+ account.
  • The Fluss+ app installed on your smart phone.
  • A Fluss+ device physcially connected to your device (for example, a garage door opener).
  • Fluss+ device connected to your Wi-Fi network and has internet access.
  • During setup of the integration in Home Assistant, you will be prompted to input your API key.
    • You can request an API key in the Fluss+ app under your profile settings.
    • The API key will allow you to access your Fluss+ devices and trigger them through Home Assistant.

Configuration

To add the Fluss+ integration to your Home Assistant instance, use this My button:

Manual configuration steps

If the above My button doesn’t work, you can also perform the following steps manually:

Button

A button in Home Assistant represents a Fluss device you have access to. You can press the button for a certain device via Wi-Fi, and it will then send a command to the connected device (like a garage door opener).

Example

If you have access to three devices in the Fluss+ app, named “Home Garage Door,” “Front Gate,” and “Office Park,” Home Assistant will display three buttons, each labeled with the corresponding device name. Pressing the “Home Garage Door” button sends a command to the Fluss+ device connected to your garage door opener, which will then trigger the motor to open / close. The same applies to the other devices.

Removing the integration

This integration follows standard integration removal.

To remove an integration instance from Home Assistant

  1. Go to Settings > Devices & services and select the integration card.
  2. From the list of devices, select the integration instance you want to remove.
  3. Next to the entry, select the three dots menu. Then, select Delete.