Landis+Gyr Heat Meter

The Landis+Gyr Heat Meter integration for Home Assistant allows you to read the meter values from Ultraheat devices by Landis & Gyr. These devices are commonly used for district heating. The integration has been tested with the Landis & Gyr Ultraheat 50 (UH50), type LUGCUH50. Other models are likely to work as well.

The device is read through the optical interface. An (USB) IR reader is needed and connected to Home Assistant.

Configuration

To add the Landis+Gyr Heat Meter integration to your Home Assistant instance, use this My button:

Sensors

The integration will create the following sensors:

• Heat usage (MWh)
• Volume usage (m3)

To be compatible with the Home Assistant energy units of measurement, heat usage is converted to MWh, from usage in GJ, which is supplied by the device, using a conversion factor: 1 GJ = 0.277778 MWh.

Further data that is read from the device is added as diagnostic entities:

• Heat usage measured in GJ, as is read from the device before conversion
• Ownership number
• Volume previous year (m3)
• Heat previous year (MWh)
• Heat previous year (GJ)
• Error number
• Device number
• Measurement period minutes
• Power max (kW)
• Power max previous year (kW)
• Flow rate max (m3ph)
• Flow rate max previous year (m3ph)
• Flow temperature max (°C)
• Return temperature max (°C)
• Flow temperature max previous year (°C)
• Return temperature max previous year (°C)
• Operating hours
• Fault hours
• Fault hours previous year
• Yearly set day
• Monthly set day
• Meter date time
• Measuring range (m3ph)
• Settings and firmware
• Flow hours

Energy dashboard

Either heat usage or volume usage can be used as “Gas” on the energy dashboard. If you want to supply a price per MWh, make sure to apply the conversion factor first.

Polling the device

Polling is by default done only once per day (and once right after adding the integration). Every time the Heat Meter values are read, battery time of the device will (supposedly) go down by about 30 minutes.

Polling manually (optional)

For detailed control on when the device is polled, disable the default polling for this integration and create an automation that will update one of the entities (the other entities will be updated as well)

If you’re comfortable with YAML, this code could be used:

alias: "Heat Meter manual update"
triggers:
  - trigger: time
    at: "23:30:00"
actions:
  - action: homeassistant.update_entity
    target:
      entity_id: sensor.heat_meter_heat_usage_gj

For more detailed steps on how to define a custom polling interval, follow the procedure below.

Defining a custom polling interval

If you want to define a specific interval at which your device is being polled for data, you can disable the default polling interval and create your own polling automation.

To add the automation:

1. Go to Settings > Devices & services, and select your integration.
2. On the integration entry, select the .
   • Then, select System options and toggle the button to disable polling.
3. To define your custom polling interval, create an automation.
   • Go to Settings > Automations & scenes and create a new automation.
   • Define any trigger and condition you like.
   • Select Add action, then, select Other actions.
   • Select Perform action, and from the list, select the homeassistant.update_entity action.
4. Save your new automation to poll for data.