Melnor Bluetooth
The Melnor Bluetooth integration allows you to control your Melnor Bluetooth watering valves. The devices are set up through Bluetooth and don’t need any additional bridge or gateway.
1-zone, 2-zone, and 4-zone valves are supported.
These devices have been sold under at least the following brands:
Configuration
To add the Melnor Bluetooth integration to your Home Assistant instance, use this My button:
Manual configuration steps
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the
Add Integration button. -
From the list, select Melnor Bluetooth.
-
Follow the instructions on screen to complete the setup.
The Melnor Bluetooth integration will automatically discover devices once the Bluetooth integration is enabled and functional.
Troubleshooting
No devices found on the network
Make sure nothing else is connected to the valve. The valve will not respond to Bluetooth discovery requests from Home Assistant if another device, such as your phone, is already connected.