Meteoclimatic
The Meteoclimatic integration uses the MeteoclimaticESCAT4300000043206B
) and the weather data reported is based on the capabilities of each station.
There is currently support for the following platforms within Home Assistant:
- Weather
- Sensor
It displays the current weather along with individual sensors that include daily maximum and minimum values.
Configuration
To add the Meteoclimatic integration to your Home Assistant instance, use this My button:
Manual configuration steps
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the
Add Integration button. -
From the list, select Meteoclimatic.
-
Follow the instructions on screen to complete the setup.
Sensor
This integration provides the following sensors:
Name | Description |
---|---|
Daily Max Humidity | Maximum humidity for the past 24 hours in % |
Daily Max Pressure | Maximum pressure for the past 24 hours in hPa |
Daily Max Temperature | Maximum temperature for the past 24 hours in °C |
Daily Max Wind Speed | Maximum wind speed for the past 24 hours in km/h |
Daily Min Humidity | Minimum humidity for the past 24 hours in % |
Daily Min Pressure | Minimum pressure for the past 24 hours in hPa |
Daily Min Temperature | Minimum temperature for the past 24 hours in °C |
Daily Precipitation | Precipitation cumulation for past 24 hours in mm |
Humidity | The current humidity in % |
Pressure | The current pressure in hPa |
Temperature | The current temperature in °C |
Wind Bearing | The current wind bearing in ° |
Wind Speed | The current wind speed in km/h |
Warning: As not all weather stations have the same capabilities, some sensors might not be available for certain weather stations. Sensors are only added if data is available and provided by Meteoclimatic.