Möhlenhoff Alpha 2
The Möhlenhoff Alpha 2 integration allows you to control a Möhlenhoff Alpha 2
temperature control system.
Prerequisites
Please make sure the base station is turned on and connected to your local network.
Configuration
To add the Möhlenhoff Alpha 2 integration to your Home Assistant instance, use this My button:
Manual configuration steps
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the
Add Integration button. -
From the list, select Möhlenhoff Alpha 2.
-
Follow the instructions on screen to complete the setup.
Climate
The climate platform provides current and target temperature information, HVAC and preset mode.
A climate entity will be created for each area. The name of the entity is taken from the name of the heat area defined in the Alpha 2 base station.
The state is polled from the base every 60 seconds.
Please note that after changing the temperature in Home Assistant, it may take up to 10 minutes for your room control units to display these changes.
Actions
This integration supports the following actions (see Climate).
set_temperature
-
set_hvac_mode
-
heat
for heating mode -
cool
for cooling mode
-
-
set_preset_mode
-
auto
enable schedule based operation -
day
enable day mode -
night
enable night mode
-