Nanoleaf
The Nanoleaf integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] allows you to control and monitor Nanoleaf Light Panels, Canvas, Shapes, Elements, and Lines.
This integration does not support the Nanoleaf Remote and Essentials lights. Controlling Nanoleaf Essentials lights is possible over Thread and Bluetooth through the HomeKit Controller integration.
Configuration
To add the Nanoleaf integration to your Home Assistant instance, use this My button:
Nanoleaf can be auto-discovered by Home Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.
If it wasn’t discovered automatically, don’t worry! You can set up a manual integration entry:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the
Add Integration button. -
From the list, select Nanoleaf.
-
Follow the instructions on screen to complete the setup.
Transition and brightness
When using a transition in an action (such as light.turn_on), the transition is only applied to brightness and does not apply to color. When an action has a transition set, but no brightness is included, the light will automatically transition to 100% brightness.
Removing the integration
This integration follows standard integration removal, no extra steps are required.
To remove an integration instance from Home Assistant
- Go to Settings > Devices & services and select the integration card.
- From the list of devices, select the integration instance you want to remove.
- Next to the entry, select the three dots
menu. Then, select Delete.