Obihai
The obihai
integration allows you to view the call status for your Obihai devices
Configuration
To add the Obihai integration to your Home Assistant instance, use this My button:
Obihai can be auto-discovered by Home Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.
Manual configuration steps
If it wasn’t discovered automatically, don’t worry! You can set up a manual integration entry:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the
Add Integration button. -
From the list, select Obihai.
-
Follow the instructions on screen to complete the setup.
The following is a list of expected sensors and their expected states when using the user
account:
- Sensor if the device requires a reboot (
True
orFalse
) - Sensor for each configured service (
0
for no calls,1
for a call and2
for call waiting/3way calling) - Sensor for the last reboot date
- Sensor for call direction (
No Active Calls
,Inbound Call
orOutbound Call
)
In addition to the above list the admin
account can expect to see the following sensors:
- Obihai service status (
Normal
,Down
or other states from Obihais network) - Sensors for each phone port in use (
On Hook
,Off Hook
andRinging
) - Sensors for last caller name and number (this is also the current incoming call, will also show
--
if no data provided)
You will also see a reboot button for each configured Obihai, this button will restart the Obihai when pressed.