Ohme
The Ohme integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] allows you to connect your Ohme
Prerequisites
- Ah Ohme account. If you signed up to Ohme with a third party account like Google, you will need to reset your password
before configuring this integration.
Supported devices
The following devices are known to be supported by the integration:
- Ohme Home Pro
- Ohme Home
- Ohme Go
- Ohme ePod
Configuration
To add the Ohme device to your Home Assistant instance, use this My button:
Manual configuration steps
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the
Add Integration button. -
From the list, select Ohme.
-
Follow the instructions on screen to complete the setup.
Supported functionality
Entities
The Ohme integration provides the following entities.
Buttons
-
Approve charge
-
Description: If sensor Status is
Pending approval
, this will approve the charge. - Available for devices: all
-
Description: If sensor Status is
Numbers
-
Target percentage
- Description: Sets the charge target for your vehicle.
- Available for devices: all
Selects
-
Charger mode
-
Description: Sets the mode of the charger. Possible options:
Smart charge
,Max charge
,Paused
. This is only available with a vehicle plugged in. - Available for devices: all
-
Description: Sets the mode of the charger. Possible options:
Sensors
-
Status
-
Description: Current status of the charger. Possible states:
Unplugged
,Pending approval
,Plugged in
,Charging
. - Available for devices: all
-
Description: Current status of the charger. Possible states:
-
Power
- Description: Power draw from the charger in kW.
- Available for devices: all
-
Current
- Description: Current draw from the charger in amperes.
- Available for devices: all
-
Energy
- Description: Energy consumption of the charger in kWh.
- Available for devices: all
-
CT current
- Description: If a current transformer (CT) was installed with your charger, this will show the current used by your whole home.
- Available for devices: Home Pro, ePod
Switches
-
Lock buttons
- Description: Disable the controls on the device.
- Available for devices: all
-
Require approval
- Description: Require approval every time a vehicle is plugged in.
- Available for devices: Home Pro
-
Sleep when inactive
- Description: Turn off the screen of the device after a few minutes of inactivity.
- Available for devices: Home Pro
Times
-
Target time
- Description: Sets the time you need your vehicle charged by.
- Available for devices: all
Actions
The integration provides the following actions.
Action: List charge slots
The ohme.list_charge_slots
action is used to fetch a list of charge slots from your charger. Charge slots will only be returned if a charge is in progress.
Data attribute | Optional | Description |
---|---|---|
config_entry |
No | The config entry of the account to get the charge list from. |
Removing the integration
This integration follows standard integration removal. No extra steps are required.
To remove an integration instance from Home Assistant
- Go to Settings > Devices & services and select the integration card.
- From the list of devices, select the integration instance you want to remove.
- Next to the entry, select the three-dot
menu. Then, select Delete.