Orvibo
Please be aware that the product ORVIBO Wi-Fi SMART SOCKET S20 (LGS-20) has been recalled by the European authorities due to safety concerns. For more information, please visit RAPEX information.
The Orvibo integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] allows you to toggle your Orvibo S20 Wi-Fi Smart Sockets.
Configuration
To add the Orvibo device to your Home Assistant instance, use this My button:
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the
Add Integration button. -
From the list, select Orvibo.
-
Follow the instructions on screen to complete the setup.
If Home Assistant cannot discover your switches, you can configure them manually.
The MAC address of the switch. This field is optional. If it is omitted, the integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] will attempt to discover and connect to the switch using the Host field alone. If this discovery fails, you must enter both the host and MAC address information.
Troubleshooting
Discovery requires that Home Assistant and the Orvibo switches are on the same network subnet. In addition, discovery may fail if the switches are in sleep mode. In this case, try toggling the switch state or power cycling the switch. If discovery still fails, you can configure the switches manually.