2026.2.3
Home ▸ Integrations ▸

Prana recuperators

The Prana recuperators integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] lets you control your Prana recuperator. You can manage motors and their operating modes, and monitor a range of sensors provided by the device.

Use case: If you have a Prana recuperator and want to automate ventilation, monitor filter status, or integrate the recuperator with other Home Assistant automations, this integration helps you do that.

Supported devices

  • Devices with Wi‑Fi control and firmware version 47 or newer

Unsupported devices

  • Models without a local network interface
  • Devices with firmware version 46 or below

Prerequisites

  1. Connect the Prana recuperator to the same local network as Home Assistant.

Configuration

To add the Prana recuperators integration to your Home Assistant instance, use this My button:

Manual configuration steps

If the above My button doesn’t work, you can also perform the following steps manually:

  • Browse to your Home Assistant instance.

  • Go to Settings > Devices & services.

  • In the bottom right corner, select the Add Integration button.

  • From the list, select Prana recuperators.

  • Follow the instructions on screen to complete the setup.

Supported functionality

Entities

The integration exposes the following entities.

Switches

  • Auto
    • Description: Enable automatic control
  • Auto+
    • Description: Enhanced automatic mode with quieter operation
  • Winter
    • Description: Winter mode for defrosting behavior
  • Heater
    • Description: Turn on heater (if available)
  • Bound
    • Description: Bind or synchronize both fans and related parameters

Data updates

The integration uses local polling. By default, Home Assistant polls the device every 10 seconds. If the device stops responding, entities are marked as unavailable until communication is restored.

Known limitations

  • No official support for some older Prana models.
  • Some indicators or device-specific details may only be available in the manufacturer’s app.
  • This integration does not provide cloud or remote control.

Troubleshooting

Device is not discovered

  1. Make sure Home Assistant and the Prana device are on the same local network.
  2. Restart the device and Home Assistant.
  3. Check whether mDNS/LLMNR is allowed by your router.

Entities show as unavailable

  • Check the device network connection.
  • Ensure the device is powered on and reachable; entities become available automatically when communication is restored.

Community notes

  • If you have a model that does not work as expected, add a note in the repository or community and include the model and firmware version

Removing the integration

This integration follows standard integration removal in Home Assistant.

To remove an integration instance from Home Assistant

  1. Go to Settings > Devices & services and select the integration card.
  2. From the list of devices, select the integration instance you want to remove.
  3. Next to the entry, select the three dots menu. Then, select Delete.

After you remove the integration from Home Assistant, we recommend checking the device settings in the Prana Online 2.0 app.

Related links