Renson
The Renson integration pulls in data from the Renson Endura delta device. Most of the sensors that can be monitored from inside the Android/iOS application can be monitored with this integration.
Configuration
To add the Renson integration to your Home Assistant instance, use this My button:
Manual configuration steps
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the
Add Integration button. -
From the list, select Renson.
-
Follow the instructions on screen to complete the setup.
Actions
Action renson.set_timer_level
Set the ventilation timer.
Data attribute | Required | Description | Example |
---|---|---|---|
timer_level |
yes | Level setting | |
minutes |
yes | Time of the timer (0 will disable the timer) |
Action renson.set_breeze
Set the breeze function of the ventilation system.
Data attribute | Required | Description | Example |
---|---|---|---|
breeze_level |
no | Ventilation level when breeze function is activated | |
temperature |
no | Temperature when the breeze function should be activated in °C | |
activate |
yes | Activate or disable the breeze feature | 2020-05-01T17:45:00 |
Action renson.set_pollution_settings
Set all the pollution settings of the ventilation system.
Data attribute | Required | Description | Example |
---|---|---|---|
day_pollution_level |
no | Ventilation level when pollution is detected in the day | |
night_pollution_level |
no | Ventilation level when pollution is detected in the night | |
humidity_control |
no | Activate or disable the humidity control | |
airquality_control |
no | Activate or disable the air quality control | |
co2_control |
no | Activate or disable the CO2 control | 2020-05-01T17:45:00 |
co2_threshold |
no | Sets the CO2 pollution threshold level in ppm | 2020-05-01T17:45:00 |
co2_hysteresis |
no | Sets the CO2 pollution threshold hysteresis level in ppm | 2020-05-01T17:45:00 |