ROMY Vacuum Cleaner
The ROMY integration allows you to control your ROMY vacuum robot.
This integration currently supports the following models:
- ROMY C5
- ROMY L6 Performance
- ROMY L6 Animal
Configuration
To add the ROMY Vacuum Cleaner integration to your Home Assistant instance, use this My button:
ROMY Vacuum Cleaner can be auto-discovered by Home Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.
If it wasn’t discovered automatically, don’t worry! You can set up a manual integration entry:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the Add Integration button.
-
From the list, select ROMY Vacuum Cleaner.
-
Follow the instructions on screen to complete the setup.
Services
Currently supported services are:
startpausecontinuestopreturn_to_base
Integration entities
The ROMY will add the following sensors.
Binary Sensors:
- Dustbin present: True if dustbin is inserted.
- Robot docked: True if the robot is docked.
- Watertank present: True if watertank is mounted (only present for ROMY’s with wet cleaning function).
- Watertank empty: True if watertank is empty and water infill is required (only present for ROMY’s with wet cleaning function).
Sensors:
- Battery Level: The battery level in percent.
- RSSI: Wi-Fi signal strength.
- Dustbin Dirt Level: The raw dustbin dirt sensor value (not every ROMY has one).
- Total cleaning time: How many hours the robot has spent cleaning in total.
- Total cleaning runs: The total number of cleaning runs.
- Total cleaned area: The total area in m² the robot has cleaned.
- Total distance driven: The total distance in m the robot has driven.
Troubleshooting
Local HTTP interface password
You have to enable the local interface first with a password. This is printed as QR Code on a label directly under the dust bin inside the robot.
ROMY robot interface protocol
Is available as download under romy-robot-interface-protocol