Schlage
The Schlage integration provides connectivity with Schlage WiFi smart locks through Schlage’s cloud API.
Configuration
To add the Schlage integration to your Home Assistant instance, use this My button:
Manual configuration steps
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the
Add Integration button. -
From the list, select Schlage.
-
Follow the instructions on screen to complete the setup.
There is currently support for the following device types within Home Assistant:
- Binary sensor
- Lock
- Sensor
- Switch
Binary sensor
Once you have enabled the Schlage integration, you should see the following binary sensor:
- Keypad disabled - Indicates that the keypad has been disabled, typically due to too many incorrect lock codes being attempted.
Select
Once you have enabled the Schlage integration, you should see the following selects:
-
Auto Lock Time - Configure the time until the deadbolt automatically locks, or disable the auto-lock feature entirely. For example,
0
: auto-lock is disabled,15
: auto-lock after 15 seconds,300
: auto-lock after 5 minutes.
Sensor
Once you have enabled the Schlage integration, you should see the following sensors:
- Lock Battery
Switch
Once you have enabled the Schlage integration, you should see the following switches:
- 1-Touch Locking - When enabled, locks the lock with a press of the Schlage button.
- Keypress Beep - Controls whether the lock will emit beeping tones on use.