2024.11.2
Home ▸ Integrations ▸

TechnoVE

The TechnoVE integration provides connectivity with TechnoVE Smart Charging Station through the station local API.

Configuration

To add the TechnoVE device to your Home Assistant instance, use this My button:

TechnoVE can be auto-discovered by Home Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.

Manual configuration steps

If it wasn’t discovered automatically, don’t worry! You can set up a manual integration entry:

  • Browse to your Home Assistant instance.

  • Go to Settings > Devices & Services.

  • In the bottom right corner, select the Add Integration button.

  • From the list, select TechnoVE.

  • Follow the instructions on screen to complete the setup.

Binary sensors

The integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] adds the following binary sensors:

  • Battery protected - On / Off
  • Charging - Charging / Not charging
  • Conflict with power sharing mode - On / Off
  • Power sharing mode - On / Off
  • Static IP - Connected / Not Connected
  • Update - Up-to-date / Update available

Number

The integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] adds the following number entity:

Name Description
max current Determines the maximum current limit that the charging station can provide to the vehicle. Note: this value can only be set when the power-sharing mode is not enabled.

Sensors

The integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] adds the following sensors:

  • Input voltage
  • Output voltage
  • Max station current
  • Current
  • Total energy usage
  • Last session energy usage
  • Wi-Fi signal strength
  • Wi-Fi network name
  • Status

Switch

The integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] adds the following switch:

Name Description
Auto-charge mode When enabled, vehicles will start charging automatically when plugged in. When turned off, charging will need to be manually started each time a vehicle is plugged in. Note: Disabling auto-charge mode does not interrupt an ongoing charging session.
Charging enabled When enabled, vehicles will be able to charge. Disable it to stop a vehicle from charging. Note: This switch can only be used when auto-charge mode is disabled.