2026.9.2
Home ▸ Integrations

Roth Touchline

The Roth Touchline integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] lets you control ROTH Touchline floor heating thermostats from Roth.

Configuration

To add the Roth Touchline hub to your Home Assistant instance, use this My button:

Manual configuration steps

If the above My button doesn’t work, you can also perform the following steps manually:

  • Browse to your Home Assistant instance.

  • Go to Settings > Devices & services.

  • In the bottom right corner, select the Add Integration button.

  • From the list, select Roth Touchline.

  • Follow the instructions on screen to complete the setup.

host

The IP address of your controller. For example, http://192.168.1.1.

Entities

The integration will present each Roth Touchline thermostat as a climate entity, which can:

  • Display the current temperature
  • Set a target temperature
  • Assign to a configured Global Schedule using Home Assistant climate entity presets.

Removing the integration

This integration follows standard integration removal. No extra steps are required.

To remove an integration instance from Home Assistant

  1. Go to Settings > Devices & services and select the integration card.
  2. From the list of devices, select the integration instance you want to remove.
  3. Next to the entry, select the three dots menu. Then, select Delete.