Twinkly

The Twinkly integration allows you to control Twinkly LED string from Home Assistant.

Effects

For devices with software version > 2.7.1, you can also control the effects on your Twinklys.

The Twinkly devices do not initially have any effects stored locally. Effects must be added from the Twinkly application before they become visible in Home Assistant.

Make sure the latest firmware is installed on your Twinkly devices and add effects by apply-ing them from the Twinkly app. This integration can then be used to switch between static colors and effects, and to turn your Twinklys on and off.

Playlists and Music modes are currently not supported.

Configuration

To add the Twinkly integration to your Home Assistant instance, use this My button:

Twinkly can be auto-discovered by Home Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.

Manual configuration steps

If it wasn’t discovered automatically, don’t worry! You can set up a manual integration entry:

If configured using an IP address, on your router / DHCP, you should assign a static IP to your Twinkly device.