VersaSense
The VersaSense integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] supports the VersaSense Edge Gateway. The gateway is able to control hubs and their peripherals (sensors and actuators) in the mesh network.
Configuration
To enable VersaSense in your installation, add it to your configuration.yaml
The configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file.
After changing the configuration.yaml
The configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file, restart Home Assistant to apply the changes. The integration is now shown on the integrations page under Settings > Devices & services. Its entities are listed on the integration card itself and on the Entities tab.
# Example configuration.yaml entry
versasense:
host: GATEWAY_URI
Supported hardware
All VersaSense gateways with software version >= 1.0.2.10
The integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] is tested with following peripherals and devices:
- S03 S04: Temperature and Humidity sensor
- S06: Barometric Pressure sensor
- S10: Light sensor
- S17: Object detection sensor
- S19: Buzzer actuator
- Pxx: SmartMesh IP Hub
- M01: SmartMesh Edge Gateway