Wolf SmartSet Service
The Wolf SmartSet Service integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] uses the Wolf Smart-Set web service as a source to fetch the status of your Wolf heating, heat pump, and solar thermal systems.
The integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] can collect information such as temperature, pressure, and system state for a wide range of Wolf devices, including gas heaters, heat pumps, and solar thermal systems.
Remember that to integrate your Wolf device with Home Assistant, you need to have a Wolf ISM7 or Wolf Link Home device connected to your heating or energy system.
The integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] fetches all data based on parameters that are exposed by your device.
Tested devices
- Wolf Link Home Pro connected to a FGB-28 device
- Wolf ISM7e / Link Pro connected to a COB-20 device
- Wolf ISM7 (HW v1.0, SW v2.10.47) connected to a CGB-2-14 device
- Wolf ISM7 / Link Home connected to a CGB-2 device (gas heater)
Configuration
To add the Wolf SmartSet Service device to your Home Assistant instance, use this My button:
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the
Add Integration button. -
From the list, select Wolf SmartSet Service.
-
Follow the instructions on screen to complete the setup.
Removing the integration
This integration follows standard integration removal, no extra steps are required.
To remove an integration instance from Home Assistant
- Go to Settings > Devices & services and select the integration card.
- From the list of devices, select the integration instance you want to remove.
- Next to the entry, select the three dots
menu. Then, select Delete.