Yandex Transport
The yandex_tranport
integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] uses Yandex Maps
The Yandex Maps
https://yandex.ru/maps/213/moscow/?ll=37.722565%2C55.806662&masstransit%5BstopId%5D=stop__9642962&mode=masstransit&z=16.52
Where stop id is: stop__9642962
If you want to track only specific routes, you can add them in the routes section.
Configuration
To activate Yandex Transport, add the following lines to your configuration.yaml
The configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file.
After changing the configuration.yaml
The configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file, restart Home Assistant to apply the changes. The integration is now shown on the integrations page under Settings > Devices & services. Its entities are listed on the integration card itself and on the Entities tab.
# Example configuration.yaml entry
sensor:
- platform: yandex_transport
stop_id: YOUR_STOP_ID
Configuration Variables
A list of a specific bus, tramway, etc routes at the stop. This is the same as the bus number, e.g., 83
. If the routes with letters contain Cyrillic symbols, so write them to configuration.yaml
in Cyrillic.
Full configuration example
The configuration sample below shows how an entry can look like:
# Example configuration.yaml entry
sensor:
- platform: yandex_transport
name: Bus_to_subway
stop_id: stop__9639579
routes:
- 63
- 179
- 179к
- 154
- 591
- 677к
Options for entities
You can configure view information about the next bus using dashboard card.
To enable displaying the relative time in your default_view
add the following lines:
# Example default_view entry
views:
cards:
- entities:
- entity: sensor.yandex_transport
format: relative
type: entities
path: default_view
Data provided by https://maps.yandex.ru